The popular printing medium is the screen printing mesh. Nowadays, a large part of people are just touching the screen printing mesh. with the development of technology. The printing process is also becoming more and more abundant. After printing, it refers to the subsequent processing of printed matter. Including, bronzing, bump, embossing, crosscutting, etc. Regarding the printing process commonly used in printing meshs, let's take a closer look at the uv process.
UV uv glazing. The cured ink can be dried by ultraviolet irradiation. Uv is usually a silk screen process. Now there is also offset uv.
When screen printing meshs print out the film, most of them still need proofing. Good color for printing.
Film must be produced, otherwise it can't be printed. Only the film can be used to print the PS board and print the printed matter. There are four main steps in the film:
(1) The computer makes good documents and draws the marking angle lines (if the color is too much, pay attention to the corner lines)
(2) Formatting the produced documents into PS files or storing RIP parsable formats such as EPS;
(3) using the hairline software to parse into a bitmap and then output the film;
(4) Waiting for results in the drying department of the film processor.
In addition to selecting the appropriate substrate and ink, the final result of the print is done by appropriate printing. Classification of printing methods, classification according to whether the printing plate is in contact with the substrate, etc.
More popular news
- Why Do Everyone Like To Use The Printing Mesh?
- Introduction To The Pink Effect Technology Of The Printing Mesh
PREVIOUS： Polyester printing mesh already in use in the glass printing industry
