The material of nylon mesh is nylon wire. For nylon wire, it divided to nylon 6 and nylon 66, which are absolutely dominant. Followed by nylon 11, nylon 12, nylon 610, nylon 612. In addition, nylon 1010. nylon 46, nylon 7, nylon 9, nylon 13. New varieties are nylon 6L nylon 9T and special nylon MXD6 (barrier resin). Nylon has a wide variety of modified varieties, such as reinforced nylon, monomer cast nylon (MC nylon), reaction injection molded (RIM) nylon, aromatic nylon, transparent nylon, high impact (super tough) nylon, electroplated nylon, conductive nylon. , flame retardant nylon, nylon and other polymer blends and alloys. It meets different special requirements and is widely used as a substitute for traditional materials such as metal and wood as various structural materials. Nylon is the most important engineering plastic, and its output ranks first among the five general engineering plastics.
Nylon 6 is a relatively economical material, nylon 66 has strong tensile strength and other properties, and nylon 612 is a higher grade. The nylon filament diameter range is generally 8% from 0.08mm to 2.5mm, and the effective rebound rate is about 85%.
Nylon mesh performance characteristics
(1) High mechanical strength, high softening point, low friction coefficient, heat resistance, abrasion resistance, oil resistance, weak acid resistance, alkali resistance, general solvent resistance, chemical resistance, antifouling, good electrical insulation, self-extinguishing Self-lubricating, shock absorption, sound absorbing, non-toxic, odorless, weather resistant.
(2) High softness, strong resilience, strong bending recovery, good working ability, no surface peeling.
(3) Fiber reinforcement can reduce the water absorption rate of the resin, and can work in high temperature and high humidity environment, and is resistant to high temperature sterilization.
(4) The affinity between nylon and glass fiber is very good. By combining special materials, two kinds of materials can be combined to produce a variety of new composite materials, so as to produce more products.
(5) It is non-toxic, but it cannot be contacted with acid or alkali for a long time.
(6) The disadvantage is that the water absorption is large, affecting the dimensional stability and electrical properties, and the dyeability is poor.
If you have any need for nylon mesh, welcome to contact MAISHI WIRE MESH MANUFACTURE GROUP
Previous:The working principle of screen printing mesh production
Next:Last