As the top domestic manufacturer, maishi Group knows more about wire mesh. Many customers have asked about the experience of using 53t wire mesh. Here are our recommendations from years of experience.
There are 7 articles in total.
1. In fact, the most important thing is the printing skills. The speed of printing is slow, and the thin mirror ink will leak down the screen. There is also a mirror ink that absorbs moisture in the air very well, and the mirror effect after printing is relatively poor. Because when 53t screen printing mesh printing, the mirror ink will be poured into the screen to print continuously and quickly. Can achieve the final printing effect.
The temperature of the 2.53t screen printing mesh printing mirror ink is also very important. This ink is easier to dry on screen. Therefore, it is not impossible to print under air circulation. Therefore, when screen printing, avoid air flow and humidity as much as possible.
3. This ink needs to be stirred thoroughly before use. The aluminum powder and resin should be mixed thoroughly and uniformly to ensure the appearance of the mirror effect, otherwise it will affect the production of the mirror effect.
4. Since the ink is as thin as water, a high mesh screen should be selected. Not only that, the squeegee hardness should be harder.
5. The final effect of mirror ink is related to drying. It should be noted that the heating temperature and drying time should be compared. Otherwise, there is a difference between the specular performance and the color saturation.
More popular articles
PREVIOUS： What are the characteristics of 90t aramid printing mesh
