Nylon printing mesh is a monofilament product. Its dimensional stability and heat resistance are better. Weaving methods include plain weave and twill weave. Plain weave up to 380 mesh and twill weave up to 330 mesh.
The nylon mesh produced by the excellent manufacturer maishi manufacturer has a smooth surface and good ink permeability, and can obtain a fine printed pattern by using a large viscosity ink. Fine mesh screens with fine mesh weave are suitable for fine pattern printing. Tensile strength, nodular fastness, good elastic wear resistance and long life. It is resistant to acids and chemicals, resistant to organic solvents, easy to regenerate, and especially resistant to alkali.
The maishi manufacturer merchants have used the nylon mesh experience of the manufacturer for many years to tell us the problem of use: nylon mesh has a higher elongation than other wire mesh, so it is necessary to pay attention to increase the strength of pulling the net.
At the same time, the contraction force will also become larger. Therefore, it is
necessary to use a strong frame and a puller. Low heat resistance. Not resistant to strong acid, formic acid erosion, UV has a slight effect on it, pay attention to protect from light
Also known as polyester mesh, its characteristics: small tensile strength, strong elasticity, single-wire mesh for printing integrated circuits, rear-mode semiconductors, can be supervised and other high-precision printed matter. Tensile strength, structural strength, resilience, and printing durability are all good. It has sufficient chemical resistance, especially acid resistance and organic solvent resistant walls, and can be regenerated like nylon mesh.
The above is the relevant introduction of the use of nylon printing mesh, I hope to be helpful to everyone.
More popular articles
PREVIOUS： Stainless steel wire mesh printing you need to pay attention to what
