Nylon printing mesh cleaning and antifouling
What affects these two properties is the cross-sectional shape of the fiber and the antifouling treatment of the subsequent channels. The strength and hardness of the fiber itself have little effect on cleaning and antifouling properties.
Nylon printing mesh color fastness
Color fastness is not a property of nylon. It is the dye in nylon rather than the nylon itself that fades under illumination.
Nylon printing mesh melting point and elasticity
Nylon 6 has a melting point of 220 C and nylon 66 has a melting point of 260 C. But this is not a difference in terms of the temperature conditions of the carpet. The lower melting point allows nylon 6 to have better resilience, fatigue resistance and thermal stability than nylon 66.
Nylon printing mesh wear resistance and dust resistance
Mai Shi is a manufacturer of nylon printing meshs. The nylon printing mesh produced has good tensile strength, impact strength, rigidity, wear resistance, chemical resistance, surface hardness, etc., high light transmittance, similar to optical glass, processing temperature is 300--315 °C, when molding, the temperature of the barrel should be strictly controlled. If the temperature of the melt is too high, the product will be discolored due to degradation. If the temperature is too low, the transparency of the product will be affected by poor plasticization. The mold temperature should be as low as possible, and the high mold temperature will reduce the transparency of the product due to crystallization.