Ceramic decal paper screen printing is a classification of screen printing by printing mesh. Its basic principle is: after the plate making, the pattern part on the screen is permeable, the non-pattern part is non-permeable, and it is attached to the screen cloth. On the upper side, the screen is brought into contact with the paper when printing, and the ink is immediately printed on the paper through the mesh of the pattern portion to complete a color printing. The ceramic applique screen printing has different stacking principles from other kinds of screen printing and color packaging printing.
Generally, color printing is produced by overprinting of three primary colors, and the ceramic decal special pigment is an oil-shaped powdery organic pigment composed of metal oxide, which has the characteristics of dullness after printing, color change without discoloration, and discoloration after grilling. Therefore, the ceramic decal paper screen printing uses a step printing method. In general, multiple or even more than one screen printing plate can be made according to the original requirements to meet the original requirements. Maishi Wire Mesh Manufacture Group can manufacture printing mesh used for ceramic printing.
The process of ceramic decal paper screen printing by printing mesh: firstly according to the user's manuscript or self-designed design, the photographic color separation, according to the characteristics of the ceramic pigment color does not change color, in general, the main flower red, blue, green to be separated, red It should be divided into three times (light, medium and deep), blue and green are divided into two times (light and deep),
and finally black or gray lines are hooked (the desktop system has been used for design and production, and the quality and progress have been greatly improved) .
After the good color is checked and the requirements are met, the positive film (single spell) is made, and the small version is used for manual proofing. After the barbecue, the sample is adjusted in various aspects until it meets the requirements, and the porcelain factory is tested, and the user approves and orders. After the machine is mass-produced.
If you have any question about the printing mesh, please contact Maishi Wire Mesh Manufacture Group.