Polyester Screen Printing Mesh

Polyester Screen Printing Mesh 32T-100

Normal specifications
Maishi Monofilament Polyester Printing Mesh (Bolting Cloth)
model mesh 
count
APERTURE  THREAD 
DIAMETER 
OPENING thickness INK THROUGH VOLUME 
THEORETICALLY
mesh/inch micron micron % micron cm 3 /m 2
6-400 15 1300 400 65 780-810 560
10-250 25 700 250 49 508-518 355
12-250 30 610 250 53 495-505 305
15-250 38 467 250 49 489-501 213
18-150 45 410 150 53 255-275 138
21-150 55 330 150 46 260-280 123
24-100 60 316 100 57 136-145 109
24-120 60 302 120 51 230-240 104
30-120 75 213 120 41 235-345 102
32-100 80 212 100 46 145-155 69
36-90 90 183 90 44 160-165 65
39-55 100 195 55 56 88-96 55.0
39-80 100 166 80 43 125-130 59.0
43-80 110 147 80 40.8 127-132 53
48-70 120 135 70 41 108-120 45.5
54-55 135 118 55 47 88-96 44.5
54-64 135 115 64 38.5 95-105 38.9
54-70 135 108 70 34 108-120 40
58-55 145 118 55 38 89-94 39.5
61-64 155 105 64 42 98-107 33
64-45 160 105 48 43 73-82 36.5
64-55 160 98 55 38 85-95 36.1
64-64 160 88 64 30 95-105 30.7
68-55 175 85 55 34 85-90 29
72-48 180 90 48 36 75-84 33.1
77-55 190 81 55 30 88-97 26.6
80-45 200 75 45 36 65-74 27.7
80-48 200 72 48 33 75-84 28.7
90-48 230 56 48 25 77-85 23.5
100-40 250 58 40 33 62-71 21.3
110-40 280 48 40 27 65-71 18.4
110-34 280 54 34 35.5 52-57 20.2
120-34 305 45 34 30.5 52-57 18.4
140-34 355 31 34 19.5 56-62 14.4
150-31 380 36 31 29 43-47 13.1
150-34 380 30 34 20.5 56-62 14.9
165-31 420 31 31 23 52-58 12.88

D (DENIER) =MICRON
9D=31MICRON, 12D=34MICRON, 16D=40MICRON, 22D=48MICRON, 30D=55MICRON;
40D=64MICRON, 50D=70MICRON, 60D=80MICRON, 80D=90MICRON, 100D=100MICRON

NoticeOther abnormal specification can be produced if the quantity more than 3000sqm



Production process 

Material yarn from Jintong, Switzerland and Japan, we inspect those yarn arrived (tolerance, tensile strength, physics test etc.).

During production, first we put the warp wires on the beam, drawing the warp wires into heddle and reed. Then our experienced weaver will start weaving mesh according to orders.

Initial survey is taken during and after weaving. Then the heat setting treatment and physical properties inspection will be done before we get tentative finished rolls (normally 60-500 meters rolls).

In the end, after the final inspection, we will cut the mesh into small rolls (20m-50m) according to customer orders.


High Tensile Micron Polyester Screen Printing Mesh
High Tensile Micron Polyester Screen Printing Mesh
 


Characteristics
 

1> 100% polyester monofilament

2> Excellent tear resistance

3> Excellent dimensional stability

4> Higher tension strength & break point

5> Low elongation

Advantage

Faster tension without damage to the threads

Improved fabric strength

Faster tension stabilization

Higher tension threshold and breaking point

Less tension loss during the stretching process

Faster turnaround time from the screen room to the press-room

Improved registration due to stable tension

 


PREVIOUS: Polyester Screen Printing Mesh 24T-120


NEXT:Polyester Screen Printing Mesh 36T-90

Our one and only priority is the customer satisfaction

Get a quote
.