News

• Some Useful Tools for Printing Mesh

  Some useful tools for printing mesh will be introduced in this article

• How to Avoid Ink Leakage When Using Screen Printing Mesh

  Part of the printing ink leakage, known as the leakage of ink failure, may occur when using screen printing mesh in printing process

• Silk screen printing yarn components and working principle

  Screen printing mesh yarn is mainly composed of five elements at the time of printing: silk screen printing plate, doctor blade, printing ink, printing equipment and substrate

• Common Causes Or Defects In Screen Printing

  A part of printed surface becomes blebby with a rough appearance like that of sharkskin It occurs due to unsuitability of colour paste viscosity and screen mesh and uneven adhesion

• Some suggestions about suitable mesh count for garments screen printing

  The selection of mesh count for garment printing is mainly affected by the printing ink and printing material, some suggestions of MAISHI as below:

• How to distinguish between polyester and nylon？

  As we know that there are two kind of materials for printing, polyester and nylon the following are some method to help you distinguish the two materials

• How to judge the quality of Stainless steel wire mesh?

  We should differentiate the good quality of stainless steel wire mesh in the following aspects according to ISO 9044:

• The common application of screen printing

  Here are the common application of screen printing, and what you should pay attention when you print it:

• Basic knowledge of Polyester Mono filament & Multi filament mesh

  Sometimes, when you want to save your printing cost on mesh, you can remove the stencil on the mesh, making it possible of re-using your mesh (MAISHI MFG GROUP mesh…

• The solution method to prevent the emergence of jagged wool

  ① Choosing the high mesh count mesh;② Choosing the high sensitivity photosensitive material to making plate;