Tech Text

Several suggestions for printing mesh choose

polyester screen printing meshSeveral suggestions for printing mesh choose

Our company MAISHI MFG. GROUP mainly produce the monofilament polyester screen printing mesh.

There are some suggestions for printing mesh as below by MAISHI MFG. GROUP:

1. The contact area between printing mesh and printed material should be as small as possible.

2. In order to achieve resolution requirements, silk screen diameter and the size of the hole should meet a certain relationship.(for details, welcome to contact us for more information)

3. In order to meet the printing requirements, you need to consider about the relationship between wire diameter and ultimate tension.(for details, welcome to contact us for more information)

4. The printing mesh selection should be based on the substrate surface conditions: Screen material: surface or undulating surface need to use a good elastic nylon mesh; Absorbent surface should be selected for large ink screen; Rough surface need a low number of mesh,etc.

5. Ink performance requirements: According to the performance of ink, select the appropriate ink screen.(for details, welcome to contact us for more information)

Any questions, please contact us freely or link with www.printing-mesh.com..


PREVIOUS: How to judge the quality of Stainless steel wire mesh?


NEXT:How to distinguish between polyester and nylon?

Our one and only priority is the customer satisfaction

Get a quote
.