② Choosing the high sensitivity photosensitive material to making plate;
③ Making a certain thickness of the screen printing plate to reduce the expansion of deformation ;
④ Using oblique Stretching method to Stretching, the best angle is 22.5°;
⑤ For fine line printing, it is better to use indirect plate making method to make plate;
⑥ In the plate making and printing process, try to control the temperature expansion factor, and use the small expansion coefficient of photosensitive material;
⑦Improve the quality of plate making to ensure the screen printing plate surface is smooth and smooth, the edge of the screen lines must to be neat;
⑧ Using the spray gun to spray screen printing plate to improve the development effect;
⑨ The distance between the screen and the printed material, the scraper angle and the pressure should be appropriate.
PREVIOUS： How to improve the pressrun of the screen printing
NEXT：Some important notes about higher mesh counts and yellow mesh
