Stainless steel wire mesh products have a wide range of excellent properties: ultra high precision, high yield point, very low elongation, no static, high corrosion resistance and wear resistance, heat fusibility and solvent resistance outstanding; Kong Fangzheng precision, mesh standard, high permeability, flat surface, no joint wire knot, accurate filter value, good rebound rate, no change in strength due to ultraviolet light, stable structural overprinting; use of rolling technology to ensure The mesh structure of the wire mesh is more stable, and the amount of printing ink is effectively controlled. The structural performance of the mesh is greatly improved during the use of the mesh, and it is not collapsed and is not exhausted; it is ensured by the selection of special stainless steel alloy materials and the most advanced weaving technology. Achieve compact and precise braided construction and standard screen thickness to keep tolerances within acceptable limits, and the accuracy of the screen is further enhanced to meet high quality printing and filtration requirements.
Stainless steel printed silk cloth is an ultra-thin special silk cloth used in the printing industry.
Main use: used for chip components, solar cells, flat panel displays, liquid crystal displays, glass, ceramics, metals, plastics, rubber, circuit boards, etc.; especially suitable for use in harsh environments, multi-color overprinting, batch printing, order Tune printing, precision printing is suitable.
The material is 316L, SUS304N, the conventional specifications are: 40 mesh - 0.16 mm (16 filaments), 60 mesh - 0.12 mm (12 filaments), 80 mesh - 0.05 mm (5 filaments), 80 mesh - 0.09 mm (9 filaments), 80 mesh - 0.12 mm (12 filaments), 100 mesh - 0.10 mm (10 filaments), 120 mesh - 0.08 mm (8 filaments), 150 mesh - 0.06 mm (6 filaments), 165 mesh - 0.035 mm (3.5 filaments), 165 mesh - 0.045 mm (4.5 filaments), 165 mesh - 0.05 mm (5 filaments), 180 mesh - 0.045 mm (4.5 filaments), 180 mesh - 0.05 mm (5 filaments), 200 mesh - 0.04 mm (4 filaments), 200 mesh - 0.05 mm (5 wire), 230 mesh - 0.035 mm, 250 mesh - 0.03 mm (3 wire), 250 mesh - 0.035 mm (3.5 wire), 250 mesh - 0.04 mm (4 wire), 270 mesh - 0.035 Millimeter (3.5 wire), 300 mesh - 0.03 mm (3 wire), 325 mesh - 0.023 mm (2.3 wire), 325 mesh - 0.028 mm (2.8 wire), 325 mesh - 0.03 mm (3 wire), 350 mesh - 0.025 Millimeter (2.5 filaments), 400 mesh - 0.023 mm (2.3 filaments), 400 mesh - 0.03 mm (3 filaments). The width is the regular width: 1.02 meters, 1.22 meters; the length is 30.5 meters; other lengths and widths can be customized according to your needs.