Printing mesh we are professional
There are generally flat weaves, weaving weaves, weft weaves, weft weaves, etc., and weaving and weaving are more common. Generally, the meshes of plain weaves are more uniform, but the weaving cost of weaving mesh is relatively high. low. Below I will introduce the nature of the mesh to everyone, we are professional in the printing mesh, I hope my article can help you.
The nature of the mesh:
1. Mesh: Refers to how many network cables are in each centimeter or inch. One inch = 2.54cm
2. Mesh opening: refers to the unit of square hole surrounded by warp and weft. The opening diameter has a great influence on the amount of ink and the quality requirements. Usually, the opening of the mesh must be more than three times the fineness of the pigment particles. (The raw material particles are about 4~10μ), so that the ink can be printed smoothly through the opening of the mesh, so the smaller the mesh number, the larger the opening and the smaller the smaller. The thicker the wire diameter, the smaller the opening. Generally, the minimum mesh diameter of the mesh is about 30μ, and the minimum mesh diameter of the special mesh is 18μ. Fine wire diameter and large opening can reproduce fine patterns.
Third, the type of wire:
1. Monofilament: refers to each thread of the mesh, which is woven from a single mesh. 2. Multifilament: It means that each thread of the mesh is made of multiple filaments. (Printing and dyeing multifilaments sometimes have better results)
Fourth, the code of the wire type:
1. NO refers to a mesh made of monofilaments. 2. TNP means that the warp and weft are woven fabrics of multifilaments. 3. TP refers to a monofilament used for warp threads and a mesh woven from multifilament yarns.
Fifth, the thickness of the mesh wiring diameter: the thickness of the mesh, has a decisive influence on the thickness of the printed ink, usually the mesh mesh is lower,
The thicker the yarn diameter will be, the thicker the mesh will be, and the thinner. Representation of the thickness of the mesh: S (Small) represents thin data.
M (Medium) indicates the material of the waiting degree. T (Thick) indicates a thick material. HD (Heavy duty) means a thick material.
Sixth, mesh size: mesh is woven by warp and weft, warp can be wireless long, weft width is generally divided into 44", 54", 64", 66", 78", select the appropriate size of the frame size of the machine Cloth avoids waste of net cloth.
Seven, mesh color: white, yellow, orange red, black, and black is not used in the current stencil, the main purpose of colored mesh is to prevent chaotic reflection
Produced, the darker the color, the more it can avoid the reflection, but the longer the exposure time, the white mesh is not suitable for making fine patterns.
Previous:Which mesh fabrics are currently mainly used for screen printing mesh?