So we extract several basic and easy ways of checking mesh quality
Check the hole shape:
Good quality printing mesh should have the square hole, to insure the printing quality. But for low quality, the hole shape will be irregular.(as shown in below email)
In general, we check the hole shape with 40x or 100x microscope.
For our old customers, we could send you a microscope for free, as long as our cooperation amount is more than USD10,000.00.
Check the mesh count:
Right mesh count is the basic requirement for printing mesh, affecting the printing quality directly. Our testing tool for mesh count checking is the "mesh count ruler"(or called "mesh count tester").
Same as above, we could send our old customer a mesh count tester for free, as long as our cooperation amount is more than USD10,000.00.
In the following days, we'll push more practical printing mesh information to you.
If you have any questions, you're welcome to contact us in any time.
MAISHI, your best partner of wire mesh.
Main products: Stainless Steel Printing mesh, Stainless steel screen printing mesh, Printing mesh, Screen printing mesh, Polyester Screen Printing Mesh, Polyester printing mesh, Stainless Steel Screen Printin and so on.